Terrell Concrete Lifting logoTerrell Concrete LiftingTerrell, TX
Driveway Leveling photo

Terrell Concrete Lifting

Driveway Leveling in Terrell, TX

Driveway leveling in Terrell TX: raise sunken sections, reseal joints, drive on it same day. Free estimates available.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Terrell and nearby communities.

Driveway leveling raises sections of concrete that have sunk relative to the rest of the slab, without tearing anything out. Terrell Concrete Lifting handles single sunken sections, whole aprons, and multi-slab driveways.

Driveways settle in sections because clay soil under one part of the slab shrinks or expands differently than the rest. That's why a driveway can look level near the street and drop two inches at the garage. We lift each low section on its own, then reseal the joints so water sheds correctly again.

What's included

What's Included

  • Section-by-section leveling — each sunken panel gets lifted independently.
  • Joint resealing — sealant reapplied after the lift so water drains the right direction.
  • Edge check — transitions to the garage floor or sidewalk get smoothed.

How it works

How We Level a Driveway

  1. Drilling access points photo
    Step 1

    Walk the driveway

    Locate every low section, not just the obvious one.

  2. Lot assessment photo
    Step 2

    Drill entry holes

    Placed to lift each panel evenly.

  3. Foam injection photo
    Step 3

    Pump material underneath

    Foam or slurry depending on the load.

  4. Inject foam or slurry photo
    Step 4

    Check with a straightedge

    Confirm each section matches its neighbors.

Materials

Materials for Driveway Leveling

Driveways carry vehicle weight, so material choice matters more here than on a walkway.

  • High-density polyurethane foam photo

    Cement-based mudjacking slurry

    adds structural weight, well suited to full driveway slabs on clay soil that needs a heavier fill.

  • Mudjacking slurry photo

    Polyurethane foam injection

    lighter and faster-curing, useful on thinner driveway sections or where fast drive-on time matters.

  • Hydraulic cement patch compound photo

    Polyurethane joint sealant

    reapplied after lifting to keep water from re-entering the void and causing repeat settlement.

Before & after

Before and After

  • Driveway Leveling photo
    Before
  • Driveway Leveling photo
    After

FAQs

Driveway Leveling FAQs

Why does my driveway keep sinking even after repairs?

If the soil underneath keeps losing moisture and shrinking, a slab can settle again even after a prior fix. Sealing the joints after lifting helps slow this by keeping water from washing more soil out from under the slab.

How much does driveway leveling cost in Terrell?

Cost depends on driveway size and how many sections have dropped. Single sections run in the low hundreds, while full driveways with multiple sunken panels run into the low thousands. A free estimate gives you an exact number for your slab.

Can you level just one section of a driveway, or does the whole thing need to be redone?

Just the sunken section, . We lift each low panel to match its neighbors without touching sections that are already level.

Will this work on a driveway with an oil stain or sealed surface?

Yes. The lifting happens from small drilled holes, not the top surface finish, so an existing sealer or stain doesn't get in the way.

Next step

Get a Free Estimate

Call +1 (469) 632-9230 to get a driveway leveling estimate, or visit Home for more details. Related services: Mudjacking and Concrete Slab Lifting. Contact us to schedule.

Ask about Driveway Leveling

Tell us about the project and how to reach you.

Call (469) 632-9230